Beer thread
-
@RoninWC said in Beer thread:
Hey @MN5 apologies for the slow response.
)
Awesome bday gift, welcome to the world of home brewing.
In terms of best place to brew, ideally you want it in an area where the temperature doesn't change much, if at all. Somewhere in the middle of the house or in the garage if you can keep the temperature more stable.
One tip, especially if it starts getting too cold, wrap the fermenter in old jackets or towels that will add some thermal protection.
My Fermzilla came with it's own jacket but I've also used a old beach towel around it to keep temps steady.
After the larger, I'd try an ale as those can stand a little more variation in temperature and try some different yeasts such as those out of the Lallemand range which are usually very easy to find and your Local Homebrew Shop (LHS).
Once you get a little more confident with the process and tools, you can look at doing Fresh Wort Kits (FWK) which are pretty foolproof as you just add yeast and hops as per recommendations on the box or even try using extracts, Dry Malt Extract (DME) over Liquid Malt Extract (LME) for me personally. You just use a prescribed amount of water heated up and you add the DME gradually until all is well dissolved. ( see
Enjoy and happy brewing!It’s ok pal, I just assumed you were hunting out memes and would get back to me when ya could
First brew seems to be going ok so far, there was a mini cold snap midweek but luckily the bloke I’m doing it with decided to grab one of these….
Mangrove Jack's Heat Pad 220-240V 25W
This Mangrove Jack's Heat Pad ensures constant brewing temperature which is crucial for the success of brewing beer, wine or spirits....
So fingers crossed that has kept things pretty constant. We did have an electrician round midweek to install a heat pump so he had to turn the power off, it did drop to briefly to 16 degrees, that shouldn’t be an issue hopefully ?
We dry hopped over the weekend and due to do bottling mid week once we’ve done the SG reading.
I CANNOT wait to get good at this and brew some weird and wonderful beers ( chillis and coffee beans are going to be added, not to the same brew )
He wants to do a Stout but keeping the fermenter at over 26 degrees ( which is what you need apparently ) might be a problem at this time of year.
-
Bit of advice needed.
Normally brew 20L from kits or grain with secondary fermentation inside a pressure keg. All good. However I've noticed people using & praising refrigerated beer dispensers which use store-bought 5L kegs of beer. See link.
I'm wondering if it's possible to re-use or get kegs which you can fill & pressurize yourself to use in these machines. Have looked online but pretty inconclusive answers - has anyone done this successfully?
-
@Victor-Meldrew said in Beer thread:
Bit of advice needed.
Normally brew 20L from kits or grain with secondary fermentation inside a pressure keg. All good. However I've noticed people using & praising refrigerated beer dispensers which use store-bought 5L kegs of beer. See link.
I'm wondering if it's possible to re-use or get kegs which you can fill & pressurize yourself to use in these machines. Have looked online but pretty inconclusive answers - has anyone done this successfully?
Can’t offer any advice sorry but hopefully @RoninWC can. He’s the expert around here.
Happy to report my Golden Lager is a nice solid starting point. It was never going to be a “wow, that’s the most incredible beer I’ve ever tasted” brew but it was bloody refreshing and so satisfying to do myself.
This one is coming up next…..I need to get more bottles.
-
Yeah, a decent beer does just fine for me. Def. not a beer connoisseur but making your own stuff is hugely satisfying.
A lot of the smaller breweries here are getting into the homebrew market and producing their own kits - this one's really nice
-
@Victor-Meldrew said in Beer thread:
Yeah, a decent beer does just fine for me. Def. not a beer connoisseur but making your own stuff is hugely satisfying.
A lot of the smaller breweries here are getting into the homebrew market and producing their own kits - this one's really nice
Red Ale at 5.5% ? That sounds decent.
The one I did is only 4.4% but like I said it came with the kit so was a perfect one to test things out on. Given a few temperature fluctuations etc it might only be about 4.2% but I’m not trying to win any awards so thats fine.
Will definitely only look at doing 5.5% and above from now on though.
-
@Victor-Meldrew said in Beer thread:
Bit of advice needed.
Normally brew 20L from kits or grain with secondary fermentation inside a pressure keg. All good. However I've noticed people using & praising refrigerated beer dispensers which use store-bought 5L kegs of beer. See link.
I'm wondering if it's possible to re-use or get kegs which you can fill & pressurize yourself to use in these machines. Have looked online but pretty inconclusive answers - has anyone done this successfully?
Don't know much about these, not seen one before and I'm not sure if they are in the Aus market.
First thing I noticed is that they use those use those "store kegs" which have a very different tap system and would assume that the specific draft dispenser would be set up to take only those kegs and tap/coupler which is kind of limiting as there isn't a huge range of those.
Personally, and to give yourself more options and better future proofed, I would use stainless steel corny kegs, 9.5 or 19l (https://www.kegland.com.au/products/9-5l-ball-lock-keg-premium-brand-new) which can be found second hand frequently (just make sure you change the O-rings) and get a decent small second hand fridge, take out the racks and use those to store and cool your beer. If you don't want to turn it into a kegerator, then to dispense your beer/seltzer/hop water/etc. use:
Either a picnic tap
or a pluto gun
Picnic/Bronco Party Tap
This standard, black plastic hand held picnic tap is the first choice for many BBQs or university parties...
Nylon Composite Pluto Gun
The pluto beer guns have become an iconic beer dispensing tool used throughout the industry. Whether it be in your garage drinks fridge or on the go with picnic set ups.Now with a new and improved design! Gen 3 Pluto gun, suited for 4mm ID x 8mm OD and 5mm ID x 8mm OD EVABarrier line. (duotight...
I recently went to a mates place in Melbourne to have a boys weekend away timed to go to the Fèis Ìle - The Islay Whisky Show so I drove there and took a 19l and 9.5l keg of beer and seltzer. To serve, I just used the two tap styles above as shown in this picture.
The resulting pours from each of the kegs:
And if you decide you want to turn that fridge into a kegerator, all you need to do is to cut through the top to mount your font, taps and push the beer/liquid lines, a hole thru the back for your gas line, a decent regulator and a 6kg CO2 refillable bottle.
And then you would have something that looks like this:
-
Hey, thanks for the info and the time you put into it.
I've found out that you can re-use the store-bought 5L kegs (or buy new ones) and use them in a refrigerated, cO2 cartridge-powered beer dispenser - becoming popular here apparently. You brew your beer in the normal way, do a light secondary fermentation in a pressure barrel, fill-up your 5L kegs, reseal with new bungs and pop in a cool place to store. The CO2 keeps the air out and they keep for 3-4 weeks or longer. You then use in your beer dispenser.
Like the 19L size though, and we do have an old mini-fridge going spare...
-
@MN5 said in Beer thread:
@RoninWC said in Beer thread:
Hey @MN5 apologies for the slow response.
)
Awesome bday gift, welcome to the world of home brewing.
In terms of best place to brew, ideally you want it in an area where the temperature doesn't change much, if at all. Somewhere in the middle of the house or in the garage if you can keep the temperature more stable.
One tip, especially if it starts getting too cold, wrap the fermenter in old jackets or towels that will add some thermal protection.
My Fermzilla came with it's own jacket but I've also used a old beach towel around it to keep temps steady.
After the larger, I'd try an ale as those can stand a little more variation in temperature and try some different yeasts such as those out of the Lallemand range which are usually very easy to find and your Local Homebrew Shop (LHS).
Once you get a little more confident with the process and tools, you can look at doing Fresh Wort Kits (FWK) which are pretty foolproof as you just add yeast and hops as per recommendations on the box or even try using extracts, Dry Malt Extract (DME) over Liquid Malt Extract (LME) for me personally. You just use a prescribed amount of water heated up and you add the DME gradually until all is well dissolved. ( see
Enjoy and happy brewing!It’s ok pal, I just assumed you were hunting out memes and would get back to me when ya could
First brew seems to be going ok so far, there was a mini cold snap midweek but luckily the bloke I’m doing it with decided to grab one of these….
This Mangrove Jack's Heat Pad ensures constant brewing temperature which is crucial for the success of brewing beer, wine or spirits....
So fingers crossed that has kept things pretty constant. We did have an electrician round midweek to install a heat pump so he had to turn the power off, it did drop to briefly to 16 degrees, that shouldn’t be an issue hopefully ?
We dry hopped over the weekend and due to do bottling mid week once we’ve done the SG reading.
I CANNOT wait to get good at this and brew some weird and wonderful beers ( chillis and coffee beans are going to be added, not to the same brew )
He wants to do a Stout but keeping the fermenter at over 26 degrees ( which is what you need apparently ) might be a problem at this time of year.
@MN5 so where's the beer porn? Pics or it was never brewed
-
@RoninWC said in Beer thread:
@MN5 said in Beer thread:
@RoninWC said in Beer thread:
Hey @MN5 apologies for the slow response.
)
Awesome bday gift, welcome to the world of home brewing.
In terms of best place to brew, ideally you want it in an area where the temperature doesn't change much, if at all. Somewhere in the middle of the house or in the garage if you can keep the temperature more stable.
One tip, especially if it starts getting too cold, wrap the fermenter in old jackets or towels that will add some thermal protection.
My Fermzilla came with it's own jacket but I've also used a old beach towel around it to keep temps steady.
After the larger, I'd try an ale as those can stand a little more variation in temperature and try some different yeasts such as those out of the Lallemand range which are usually very easy to find and your Local Homebrew Shop (LHS).
Once you get a little more confident with the process and tools, you can look at doing Fresh Wort Kits (FWK) which are pretty foolproof as you just add yeast and hops as per recommendations on the box or even try using extracts, Dry Malt Extract (DME) over Liquid Malt Extract (LME) for me personally. You just use a prescribed amount of water heated up and you add the DME gradually until all is well dissolved. ( see
Enjoy and happy brewing!It’s ok pal, I just assumed you were hunting out memes and would get back to me when ya could
First brew seems to be going ok so far, there was a mini cold snap midweek but luckily the bloke I’m doing it with decided to grab one of these….
This Mangrove Jack's Heat Pad ensures constant brewing temperature which is crucial for the success of brewing beer, wine or spirits....
So fingers crossed that has kept things pretty constant. We did have an electrician round midweek to install a heat pump so he had to turn the power off, it did drop to briefly to 16 degrees, that shouldn’t be an issue hopefully ?
We dry hopped over the weekend and due to do bottling mid week once we’ve done the SG reading.
I CANNOT wait to get good at this and brew some weird and wonderful beers ( chillis and coffee beans are going to be added, not to the same brew )
He wants to do a Stout but keeping the fermenter at over 26 degrees ( which is what you need apparently ) might be a problem at this time of year.
@MN5 so where's the beer porn? Pics or it was never brewed
Solid first effort I reckon…….
-
@MN5 said in Beer thread:
@RoninWC said in Beer thread:
Hey @MN5 apologies for the slow response.
)
Awesome bday gift, welcome to the world of home brewing.
In terms of best place to brew, ideally you want it in an area where the temperature doesn't change much, if at all. Somewhere in the middle of the house or in the garage if you can keep the temperature more stable.
One tip, especially if it starts getting too cold, wrap the fermenter in old jackets or towels that will add some thermal protection.
My Fermzilla came with it's own jacket but I've also used a old beach towel around it to keep temps steady.
After the larger, I'd try an ale as those can stand a little more variation in temperature and try some different yeasts such as those out of the Lallemand range which are usually very easy to find and your Local Homebrew Shop (LHS).
Once you get a little more confident with the process and tools, you can look at doing Fresh Wort Kits (FWK) which are pretty foolproof as you just add yeast and hops as per recommendations on the box or even try using extracts, Dry Malt Extract (DME) over Liquid Malt Extract (LME) for me personally. You just use a prescribed amount of water heated up and you add the DME gradually until all is well dissolved. ( see
Enjoy and happy brewing!It’s ok pal, I just assumed you were hunting out memes and would get back to me when ya could
First brew seems to be going ok so far, there was a mini cold snap midweek but luckily the bloke I’m doing it with decided to grab one of these….
This Mangrove Jack's Heat Pad ensures constant brewing temperature which is crucial for the success of brewing beer, wine or spirits....
So fingers crossed that has kept things pretty constant. We did have an electrician round midweek to install a heat pump so he had to turn the power off, it did drop to briefly to 16 degrees, that shouldn’t be an issue hopefully ?
We dry hopped over the weekend and due to do bottling mid week once we’ve done the SG reading.
I CANNOT wait to get good at this and brew some weird and wonderful beers ( chillis and coffee beans are going to be added, not to the same brew )
He wants to do a Stout but keeping the fermenter at over 26 degrees ( which is what you need apparently ) might be a problem at this time of year.
Meant to reply to this before. A stout is an ale and no way would you ferment at that high a temp. I then looked around the library on BrewFather and after checking a half dozen or so stouts from contributors I trust, I would say that a stout should be fermented at around 18-20°C and not 28.
Given it's winter now, that probably makes it a good time to do a stout but one thing with dark heavy beers, they usually take longer to brew and longer to condition before drinking.
A good half way would be a nice amber ale or something like this from Long White Cloud Brewing Company which make High Gravity Wort (what we call Fresh Wort Kits or FWK) so you dump it into your fermenter, add water to desired volume and then pitch yeast.
They make a malt monster that looks good.
-
@RoninWC said in Beer thread:
Meant to reply to this before. A stout is an ale and no way would you ferment at that high a temp. I then looked around the library on BrewFather and after checking a half dozen or so stouts from contributors I trust, I would say that a stout should be fermented at around 18-20°C and not 28.
A mate is playing with Kveik style yeasts - they thribve at that higher temp, and make some really interesting beers.
But yeah, otherwise no
-
-
@nzzp said in Beer thread:
@RoninWC said in Beer thread:
Meant to reply to this before. A stout is an ale and no way would you ferment at that high a temp. I then looked around the library on BrewFather and after checking a half dozen or so stouts from contributors I trust, I would say that a stout should be fermented at around 18-20°C and not 28.
A mate is playing with Kveik style yeasts - they thribve at that higher temp, and make some really interesting beers.
But yeah, otherwise no
I've been using Kveik yeasts in a number of brews and always in a Seltzer. So far I've tried Voss from Lallemand as well as Lutra and Hornindal from Omega. Love how they ferment hot and fast.
I've been able to serve 5 days from the brew day including a 2 day cold crash so full grain to glass in 5 days which was amazing.
-
@RoninWC said in Beer thread:
@MN5 said in Beer thread:
@RoninWC said in Beer thread:
Hey @MN5 apologies for the slow response.
)
Awesome bday gift, welcome to the world of home brewing.
In terms of best place to brew, ideally you want it in an area where the temperature doesn't change much, if at all. Somewhere in the middle of the house or in the garage if you can keep the temperature more stable.
One tip, especially if it starts getting too cold, wrap the fermenter in old jackets or towels that will add some thermal protection.
My Fermzilla came with it's own jacket but I've also used a old beach towel around it to keep temps steady.
After the larger, I'd try an ale as those can stand a little more variation in temperature and try some different yeasts such as those out of the Lallemand range which are usually very easy to find and your Local Homebrew Shop (LHS).
Once you get a little more confident with the process and tools, you can look at doing Fresh Wort Kits (FWK) which are pretty foolproof as you just add yeast and hops as per recommendations on the box or even try using extracts, Dry Malt Extract (DME) over Liquid Malt Extract (LME) for me personally. You just use a prescribed amount of water heated up and you add the DME gradually until all is well dissolved. ( see
Enjoy and happy brewing!It’s ok pal, I just assumed you were hunting out memes and would get back to me when ya could
First brew seems to be going ok so far, there was a mini cold snap midweek but luckily the bloke I’m doing it with decided to grab one of these….
This Mangrove Jack's Heat Pad ensures constant brewing temperature which is crucial for the success of brewing beer, wine or spirits....
So fingers crossed that has kept things pretty constant. We did have an electrician round midweek to install a heat pump so he had to turn the power off, it did drop to briefly to 16 degrees, that shouldn’t be an issue hopefully ?
We dry hopped over the weekend and due to do bottling mid week once we’ve done the SG reading.
I CANNOT wait to get good at this and brew some weird and wonderful beers ( chillis and coffee beans are going to be added, not to the same brew )
He wants to do a Stout but keeping the fermenter at over 26 degrees ( which is what you need apparently ) might be a problem at this time of year.
Meant to reply to this before. A stout is an ale and no way would you ferment at that high a temp. I then looked around the library on BrewFather and after checking a half dozen or so stouts from contributors I trust, I would say that a stout should be fermented at around 18-20°C and not 28.
Given it's winter now, that probably makes it a good time to do a stout but one thing with dark heavy beers, they usually take longer to brew and longer to condition before drinking.
A good half way would be a nice amber ale or something like this from Long White Cloud Brewing Company which make High Gravity Wort (what we call Fresh Wort Kits or FWK) so you dump it into your fermenter, add water to desired volume and then pitch yeast.
They make a malt monster that looks good.
Extra time isn’t an issue I just don’t want to fuck it up. If you look at the manuals on the page they definitely say to do it at a higher temperature, Saisons too but to be honest I won’t bother with them.
-
@RoninWC said in Beer thread:
Very solid effort @MN5
Colour looks spot on, good head on it as well.Thanks pal.
Given that I’m so conditioned to craft beers I think 4.4% just tasted a bit, “empty” for want of a better word or perhaps I’m a perfectionist, not quite sure !
Will do pics of the next one on here too.
-
@RoninWC said in Beer thread:
@MN5 said in Beer thread:
@RoninWC said in Beer thread:
Hey @MN5 apologies for the slow response.
)
Awesome bday gift, welcome to the world of home brewing.
In terms of best place to brew, ideally you want it in an area where the temperature doesn't change much, if at all. Somewhere in the middle of the house or in the garage if you can keep the temperature more stable.
One tip, especially if it starts getting too cold, wrap the fermenter in old jackets or towels that will add some thermal protection.
My Fermzilla came with it's own jacket but I've also used a old beach towel around it to keep temps steady.
After the larger, I'd try an ale as those can stand a little more variation in temperature and try some different yeasts such as those out of the Lallemand range which are usually very easy to find and your Local Homebrew Shop (LHS).
Once you get a little more confident with the process and tools, you can look at doing Fresh Wort Kits (FWK) which are pretty foolproof as you just add yeast and hops as per recommendations on the box or even try using extracts, Dry Malt Extract (DME) over Liquid Malt Extract (LME) for me personally. You just use a prescribed amount of water heated up and you add the DME gradually until all is well dissolved. ( see
Enjoy and happy brewing!It’s ok pal, I just assumed you were hunting out memes and would get back to me when ya could
First brew seems to be going ok so far, there was a mini cold snap midweek but luckily the bloke I’m doing it with decided to grab one of these….
This Mangrove Jack's Heat Pad ensures constant brewing temperature which is crucial for the success of brewing beer, wine or spirits....
So fingers crossed that has kept things pretty constant. We did have an electrician round midweek to install a heat pump so he had to turn the power off, it did drop to briefly to 16 degrees, that shouldn’t be an issue hopefully ?
We dry hopped over the weekend and due to do bottling mid week once we’ve done the SG reading.
I CANNOT wait to get good at this and brew some weird and wonderful beers ( chillis and coffee beans are going to be added, not to the same brew )
He wants to do a Stout but keeping the fermenter at over 26 degrees ( which is what you need apparently ) might be a problem at this time of year.
Meant to reply to this before. A stout is an ale and no way would you ferment at that high a temp. I then looked around the library on BrewFather and after checking a half dozen or so stouts from contributors I trust, I would say that a stout should be fermented at around 18-20°C and not 28.
Given it's winter now, that probably makes it a good time to do a stout but one thing with dark heavy beers, they usually take longer to brew and longer to condition before drinking.
A good half way would be a nice amber ale or something like this from Long White Cloud Brewing Company which make High Gravity Wort (what we call Fresh Wort Kits or FWK) so you dump it into your fermenter, add water to desired volume and then pitch yeast.
They make a malt monster that looks good.
I used to play with kits and mix them to good result. Take a decent stout kit and mix in an amber/brown ale. You can play with the ratios and save the leftover malt for another go. That can mean that you can up the gravity and % but also get a 'lighter' result more like a Porter.
I did a take on the Kereru Toasted Coconut Porter this way that turned out mint. My only complaint was that because I bottle conditioned and didn't add CO2, the oils from the coconut 'flattened' the head too quickly once poured.Found it a fun way to play without going full brewing monty.
Also found that cutting into 5l carbouys to ferment meant I could try tweaked recipes in each and the amount of beer wasted if a 'recipe' didn't work was less. -
@MN5 said in Beer thread:
@RoninWC said in Beer thread:
Very solid effort @MN5
Colour looks spot on, good head on it as well.Thanks pal.
Given that I’m so conditioned to craft beers I think 4.4% just tasted a bit, “empty” for want of a better word or perhaps I’m a perfectionist, not quite sure !
Will do pics of the next one on here too.
Hahah, completely agree @MN5, anything less than 6-6.5% is just dishwater to me. When buying craft beers, I always go for the bigger which for me are often if not most always better. Alcohol seems to be able to carry the bigger hoppy flavours in the West Coast IPAs and Hazy/NEIPAs that I love.
My last three grain to glass beers have been:
Russian River Pliny the Elder (WC IPA) Clone @8.25%
Aurora House No-Boil DDH Double NEIPA @8.1%
Aurora House DDH Double NEIPA @9%BTW, the Aurora House part comes from the apartment where we live.
Baridi 5L Beer Draught Dispenser Tap Machine with Integrated Cooling for 5L Kegs - DH49 : Amazon.co.uk: Home & Kitchen
Technical Info | Long White Cloud Brewing Company
